Answer To start metal stamping, you need: Equipment: Press machine (mechanical/hydraulic) and stamping dies; Materials: Metal sheets (e.g., carbon steel, aluminum alloy); Auxiliary tools: Feeder, lubricants, measuring gauges; Workspace:…
Answer There is no universal “best” metal for metal stamping; the ideal choice hinges on application-specific requirements such as mechanical properties, corrosion resistance, formability, and cost. Key metals include: Low-Carbon…
Answer The CNC stamping process is an automated manufacturing method that integrates numerical control (CNC) technology with traditional stamping. It uses computer programs to control stamping equipment (such as presses…
Answer The four basic types of metal stamping are blanking, bending, drawing, and forming. Blanking: Separates materials along a predetermined contour using dies, including punching (removing waste) and blanking (obtaining…
Answer The core differences between CNC machining and stamping are as follows: CNC machining uses computer – controlled cutting tools to cut raw materials (such as metals and plastics), achieving…
1、Answer The total time for injection molding varies widely: Single part cycle time: 10 seconds to 5+ minutes, depending on material (e.g., fast-cooling thermoplastics vs. slow-curing thermosets) and part…
1、Answer No, injection molding is not only for plastic. While plastics are the most common materials, the process also works for metals (via metal injection molding, MIM), ceramics (CIM), rubber, and even food materials (e.g., chocolate). Each material requires…
1、Answer The lifespan of 3D printed molds depends on material and use. Low-temperature thermoplastics (e.g., PLA, ABS) typically last 10–50 cycles for simple, low-pressure applications (e.g., resin casting). High-temperature resins or specialized materials (e.g., Nylon, PETG)…
1、Answer Check for mold lines (thin seams where mold halves meet), ejector pin marks (small circular indentations from part removal), and gate vestiges (small nubs where molten material entered the mold). Look for uniform thickness, surface…
1、Answer CNC machines cut by using computer-controlled tools (e.g., end mills, drills, lathe tools) that move along precise paths defined by G-code. The machine’s motors drive the tools or workpiece to remove…