Fill in your requirements, we will contact you soon
We have received your inquiry. Our engineering team will respond within 24 hours; the full quotation depends on drawing complexity.




From automotive structures to medical instruments, we manufacture to the tolerances and certifications your commercial application demands — across all six in-house processes. Select an industry to see how we support it.
Die-cast and CNC structural parts for automotive programs — brackets, housings and powertrain components, with IATF 16949 requirements supported.
All six processes under one roof and one quality system — explore each capability and where to send your drawings.

5-axis milling & turning for prototypes and volume runs, ±0.005 mm on qualified features, Ra 0.4 µm finish.
One engineering team owns every step — so the quote, the sample and the shipment stay aligned from first inquiry to final delivery.
Send drawings (STEP / IGES / STL / X_T / SLDPRT) or a physical sample. A dedicated project engineer replies within 24 hours with feasibility, a process route and a transparent quoted range — no account-manager hand-offs.
Before any tooling is cut, our engineers run a free manufacturability analysis — wall thickness, draft angles, tolerances (down to ±0.005 mm on qualified features), surface finish (Ra 0.4 μm) and material grade — flagging cost drivers and risk upfront.
First articles by CNC, 3D printing or rapid tooling in 3–7 working days. Each sample ships with CMM measurement and a First Article Inspection (FAI) report on file, so the spec is verified before you commit.
Approved samples move to in-house volume runs — all six processes (CNC, injection, mold making, 3D printing, die casting, sheet metal) under one ISO 9001:2015 system. MOQ from 1 piece; typical lead time 15–25 working days.
Every batch is inspected, documented and packed to your Incoterms, then shipped on the committed date — 99.8% on-time delivery, with full traceability from purchase order to shipment. We serve customers in 100+ countries worldwide.
One shop floor, one quality system — accountable from first sample to last shipment.
Figures shown are typical capabilities: ±0.005 mm applies to qualified CNC features verified by inspection, and MOQ / lead times are confirmed against your drawing at RFQ. The 100+ machines figure is the combined total across our six in-house processes; 100+ countries refers to customers we serve worldwide.
One point of accountability for custom metal and plastic parts — from first drawing to volume production.
Xiamen Goldcattle Plastic & Metal Products Co., Ltd. is a custom OEM/ODM precision manufacturer — built around one belief: own the whole process, and you own the quality.
We turn customer drawings into production-ready metal and plastic parts. We keep the full process chain under our own roof — CNC machining, injection molding, mold making, 3D printing, die casting and sheet metal fabrication. One factory, one quality system, one engineering team, accountable from first sample to last shipment.
A lot has changed, but the model hasn't — answer engineers within 24 hours, and ship on the date we promise, with 99.8% on-time delivery.
Six processes, one roof. We control the steps that decide quality.
DFM review, real tolerances, CMM and FAI on file — like your own manufacturing department.
Customers in 100+ countries, STEP / IGES / STL / X_T / SLDPRT welcome, 24 h engineering response.
One ISO 9001:2015 quality system governs all six in-house processes — with inspection, documentation and traceability built into every step, from first sample to final shipment.
One certified quality system covering CNC machining, injection molding, mold making, 3D printing, die casting and sheet metal fabrication.
First-article and batch dimensions are measured in-house, so tolerances down to ±0.005 mm on qualified CNC features are verified, not assumed.
Every prototype ships with an FAI report and dimensional record, so the specification is confirmed before you commit to production.
SGS, RoHS and Rmbond material and product compliance reports are on file and traceable by report number.
Surface finish to Ra 0.4 μm · Full traceability from purchase order to shipment · Inspection records with every batch
All six core processes run in-house — engineered, machined, molded and inspected by one team under one quality system, from first sample to volume production.
A few representative parts that show what our six in-house processes deliver — produced to customer print, measured, and shipped under one ISO 9001:2015 quality system.
5-Axis CNC
A tight-tolerance structural part finished in a single setup on our 5-axis machining centers — removing fixturing error between critical datums and shortening lead time.
Die Casting
A pressure-tight aluminum housing cast to near-net shape, then CNC-machined on datums for sealing faces — combining die-casting economy with machined accuracy.
Injection
A family of cosmetic closures molded in eco-friendly resin with strict cosmetic-surface requirements — tooling, molding, and assembly handled in-house.
Mold Making
A multi-cavity injection mold built and verified in-house — engineered for repeatable, long-cavity life and tight part consistency across production runs.
From medical OEMs to automotive tier suppliers, buyers choose one accountable process — and a delivery record that holds.
Read more stories →"First samples matched the spec exactly — no re-runs."
"Their DFM feedback shortened our prototype cycle."
"Parts show up on the date promised, every time."
The questions procurement and engineering teams ask us most — answered plainly, with the same figures we hold to on every project.
Prototypes start from 1 piece. For low-volume and mass production, MOQ is confirmed against your drawing at RFQ — we do not apply a one-size-fits-all minimum.
Typical prototypes ship in 3–7 working days; low-volume runs in 7–20 working days; mass production in 15–25 working days. Final lead times are confirmed after engineering review of your drawing.
Typical CNC tolerance is ±0.01 mm, with down to ±0.005 mm on qualified features verified by in-house CMM inspection. Achievable tolerance depends on geometry, material and feature — we confirm it in the free DFM review, not as a blanket promise.
STEP, IGES / IGS, STL, X_T, SLDPRT, DWG and PDF drawings are welcome, plus common 3D and document formats. You can attach files directly to the inquiry form, or email us at charlie@plasticmetalparts.com.
We operate under an ISO 9001:2015 quality system and keep SGS, RoHS and Rmbond test reports on file. We support IATF 16949, ISO 13485 and AS9100 requirements with aligned process controls, and can provide FAI and inspection documentation — tell us what your project requires.
Send your drawings or a sample; a project engineer responds within 24 hours with feasibility and a transparent quoted range. Payment terms and Incoterms are agreed in the quotation — share your preferred terms in the RFQ.
Still have a question? Our engineers answer within 24 hours.
One factory, six processes, one quality system — accountable from first sample to volume production.
BLOG