Thermal Management · CNC Machined Components

Custom CNC-Machined Cold Plates & Liquid Cooling Components

Precision-machined aluminum and copper cold plate bodies, coolant channels, cover plates and manifolds made to your drawings. Each part is reviewed for channel geometry, remaining wall thickness, thermal interface flatness and the agreed sealing route.

See what we machine
CNC machined aluminum liquid cold plate body with milled serpentine coolant channels, inlet and outlet ports on a white background
A direct answer for buyers and engineers

What does a custom cold plate CNC machining supplier make? A specialist machines the metal parts of a liquid cold plate: the aluminum or copper body, the milled coolant channels, the cover plate, fluid manifolds, port blocks and thermal mounting faces. Each part is built to the customer's drawing and reviewed for channel layout, material, minimum remaining wall thickness and inspection needs. Goldcattle supplies these machined components. Full sealed cold plate assembly, leak and flow testing, thermal validation, thermal design and CFD are separate scopes confirmed by project, not standard in-house services.

01 · What we machine for cold plates

You can order cold plate components one part at a time. We review each against your drawing before we confirm we can make it. The categories below describe work we can assess; they are not a stock catalogue of finished cold plates.

Body

Cold plate bodies

Machined aluminum or copper base bodies with pockets, ports, mounting holes and features for the coolant circuit.

Channels

Channel plates

Plates with milled internal coolant channels: serpentine, parallel, multi-pass or manifold layouts to your design.

Cover

Cover plates

Machined covers with O-ring grooves, bolt patterns and sealing faces that close the channel circuit.

Fluid

Manifolds & ports

Fluid manifold blocks, inlet and outlet port blocks, and connection features with threaded ports and internal passages.

Interface

Thermal mounting plates

Contact plates and mounting interfaces with controlled flatness and hole positions for the heat source.

Materials

Aluminum & copper

Aluminum 6061 and selected copper grades, chosen per part. We confirm grade and condition against your drawing.

We make machined components, not complete sealed and tested liquid cold plates. Brazing, friction stir welding, final assembly and performance testing are reviewed by project and confirmed before we quote.

02 · Cold plate structures are not all the same

Buyers often call every liquid cooling plate a "cold plate". The way the channel is closed changes the process, the cost and who does the work. Knowing the route matters when you request a quote.

Swipe the table to see all columns.

StructureHow it is madeOur scope
CNC milled + bolted coverMilled channel sealed with a bolted cover and O-ringWe machine the parts; sealing and testing by agreement
Friction stir welded (FSW)Milled channel closed by a welded coverReviewed by project; not a standard in-house step
Vacuum brazedMulti-part plate bonded to form internal channelsReviewed by project; not a standard in-house step
Tube embeddedMetal tube pressed into a machined grooveReviewed by project; not a standard in-house step

The first route fits prototypes and low volumes because it can be opened for inspection. Joining routes can distort the plate, so the final thermal face may need machining after joining. We confirm which steps we perform for your project; we do not assume every route is ours.

03 · Applications we build components for

Engineers often search by the equipment they are building, not by a part name. Each area below lists the features that usually matter. This is a selection guide, not a claim that we supply complete cooling systems.

Power electronics

Inverters & modules

IGBT and SiC module cold plates. Focus: heat-load distribution, mounting flatness and coolant compatibility.

Laser & optical

Laser equipment

Laser and optical module plates. Focus: local heat flux, contact-face flatness and cleanliness.

EV & storage

Battery & BESS

Battery and energy-storage cooling plates. Focus: temperature uniformity, plate distortion and unit cost.

Data center

Servers & accelerators

Direct-to-chip plates for CPUs and GPUs. Focus: contact face, flow distribution, pressure drop and space limits.

Semiconductor

Process equipment

Precision equipment and test plates. Focus: stability, cleanliness, internal particles and batch consistency.

Industrial

Drive systems

Inverter and servo drive plates. Focus: thermal load, pressure drop and mounting interface.

These application links describe where parts are used. We do not claim complete thermal systems, certification or AI-server qualification from machining alone. Qualification and full performance validation follow the customer's programme.

04 · Material selection for cold plates

Aluminum and copper are the common choices. Conductivity is only one part of the decision; heat flux, coolant, weight, cost, plate size, joining method and corrosion all matter.

Swipe the table to see all columns.

MaterialStrengthsLimits & use
Aluminum 6061-T6Light, good machinability, moderate costLower conductivity than copper; many larger plates and power parts
Aluminum 6061-T651Stress-relieved plate stockConsider distortion after large-area channel milling
Copper C110High thermal conductivityHeavier and costlier; high heat-flux spots such as CPUs and lasers
Stainless steelCorrosion resistance for some fluidsLower conductivity; special compatibility cases only
CNC machined copper liquid cold plate with milled coolant channels and inlet outlet ports on a white background
A machined copper cold plate. Material is selected from the heat load, coolant and budget.
When aluminum and copper sit in the same coolant loop, galvanic corrosion can occur. Coolant chemistry, metal contact and corrosion control must be reviewed together. We confirm the actual grade and supply before we promise a material capability.

05 · Machining the coolant channels

The channel is the core of a cold plate. Its layout drives flow, pressure drop and how clean the plate can be made inside.

Swipe the table to see all columns.

Channel typeFeatureDesign concern
SerpentineOne continuous pathOverall length and pressure drop
ParallelMultiple side-by-side pathsEven flow distribution
Multi-passSeveral return pathsTemperature spread and pressure drop
MicrochannelVery fine channelsMachining accuracy, clogging and cleaning
ManifoldDistribution and collection zonesFlow split, ports and internal shape
Close-up of a milled serpentine coolant channel in an aluminum cold plate showing clean channel walls and uniform depth
A milled channel close-up. Tool access, wall thickness and internal cleaning are reviewed before cutting.

Finer channels are not automatically better. Small channels can raise flow resistance and are more sensitive to burrs and trapped particles. We review tool access, cutter size, remaining wall thickness and how the channel will be cleaned. Thermal simulation and flow optimization stay with the design side unless a separate scope is agreed.

06 · Thermal interface flatness and finish

The area that touches the heat source needs a controlled contact face. Not every surface of the plate needs the same flatness, so the drawing should name the contact area and its requirement.

  • Thermal contact area — define exactly which face touches the heat source.
  • Flatness and roughness — set per the contact need, not one value for the whole plate.
  • Mounting datum — state the datum used for the contact face.
  • Interface material — note the thermal pad or compound the design uses.
  • Finish direction — specify it when the design requires a direction.

Joining steps such as welding or brazing can bend the plate. For those routes, the final contact-face requirement should be checked on the finished assembly, not only on the machined body before joining. We agree the inspection stage with you.

We do not quote a single blanket flatness for all cold plates. The result depends on material, size, wall thickness and process. Requirements come from your drawing and agreed inspection plan.

07 · Sealing, cover plates and joining

How the channel is closed is as important as how it is cut. We machine the sealing features and control their dimensions, then define which closing and test steps belong to the project.

Machined aluminum cold plate cover plate and base separated to show the O-ring sealing groove, bolt holes and sealing faces on a white background
A cover plate and base with the sealing groove and bolt pattern. Groove size follows the seal specification.
  • O-ring groove — width, depth and finish follow the seal data, not a rule of thumb.
  • Cover bolt pattern — position and torque pattern per drawing.
  • Sealing face — flatness and finish are checked against the drawing.
  • Internal burrs — channels are cleaned after machining so passages stay open.
  • Joining route — bolted, welded or brazed, confirmed before we quote.
We control machined sealing dimensions, but we do not promise a finished plate will not leak before the agreed closing and test steps are done. Vacuum brazing and friction stir welding are reviewed by project, not claimed as standard in-house work.

08 · Inspection and testing

Cold plate quality has several levels. Correct dimensions alone do not prove a plate will seal or cool well. We separate what we inspect on the machined part from what needs agreed test equipment.

Swipe the table to see all columns.

LevelTypical checksStatus
DimensionalChannel width and depth, wall thickness, port location, contact-face flatness, O-ring grooveMachined-part inspection
Internal channelLeftover chips, burrs, blockage, channel connectionCleaning and visual or agreed method
Pressure & leakPressure test, pressure decay, bubble or helium leak testAgreed method, equipment and criteria
Flow & pressure dropFlow rate, inlet and outlet pressure, differential pressureTest bench by project
Thermal performanceThermal resistance, surface temperature, uniformitySpecial thermal test conditions by project
Coordinate measuring machine with a touch probe inspecting the flatness of a machined aluminum cold plate on a granite table
A touch probe measuring the contact face. Inspection is planned around the features that matter.

Leak testing is not one single method. Pressure, bubble, pressure-decay and helium tests suit different needs. A request that only says "leak test required" is not enough; the medium, pressure, time, allowed leak rate and acceptance rule must be defined. We confirm the real test scope with you rather than assume it.

We do not claim 100% leak, flow or thermal testing as a standard service. Reports show what was actually measured. Dimensional inspection of a machined part does not prove a complete cold plate's sealing or thermal performance.

09 · Typical CNC cold plate workflow

The steps below show how a machined cold plate component usually moves from drawing to part. Joining and performance test steps are marked as agreed scopes, because they are not automatic in-house work.

Five-axis CNC milling machine cutting a serpentine coolant channel into an aluminum cold plate in a bright machine shop
CNC milling of a cold plate channel. Process shown to illustrate the machining route.
  1. Drawing and specification review our scope
    Confirm material, contact area, channels, wall thickness, ports, sealing and inspection needs.
  2. Material preparation our scope
    Check grade, condition, size and material documents.
  3. CNC channel machining our scope
    Machine channels, pockets, holes and internal features.
  4. Cover and sealing features our scope
    Machine cover, O-ring groove, threads and sealing faces.
  5. Deburring and internal cleaning our scope
    Remove burrs and chips so passages stay open and clean.
  6. Joining or assembly by agreement
    Bolted, welded or brazed closing, per the confirmed route.
  7. Post-joining machining by agreement
    Restore contact face and key dimensions if joining caused distortion.
  8. Final inspection and required testing by agreement
    Dimensions, flatness, and any leak, flow or thermal tests specified.
  9. Final cleaning and packaging our scope
    Clean, dry, protect ports and pack to requirement.
Planning a cold plate component?

Send your drawing for a machining review. We check the channel layout, material, wall thickness and inspection needs before we quote, and raise any questions with you first.

Frequently asked questions

What is a CNC machined cold plate?

A CNC machined cold plate is a metal plate with channels cut into it so coolant can flow and carry heat away from a component. Goldcattle machines cold plate bodies, coolant channels, cover plates, manifolds and mounting interfaces from customer drawings. We machine the parts; complete sealed assembly and thermal testing are separate, agreed scopes.

What cold plate parts can you machine?

We machine cold plate bodies, channel plates, cover plates, fluid manifolds, inlet and outlet port blocks, and thermal mounting plates. Work is reviewed from your drawing before we confirm it. These are machined components we can assess; they are not a stock catalogue of complete liquid cold plates.

Do you manufacture complete liquid cold plates?

At this stage we make the machined components, not a fully sealed and tested liquid cold plate assembly. Work such as vacuum brazing, friction stir welding, final sealing, leak testing, flow testing and thermal validation is reviewed by project. We confirm the real process and test scope with you before we quote or promise anything.

Should I choose aluminum or copper for a cold plate?

Aluminum 6061 is light, machines well and costs less, so it suits many larger plates and battery or power electronics parts. Copper carries heat better but is heavier and costs more, so it suits high heat-flux spots such as CPUs, GPUs and lasers. The right choice depends on heat load, weight, coolant, corrosion and cost.

What coolant channel types can you machine?

Common layouts we review include serpentine channels, parallel channels, multi-pass channels, manifold channels and microchannels. Channel choice affects flow distribution, pressure drop and cleaning. Smaller channels are not always better; they can raise flow resistance and are more sensitive to burrs and leftover particles.

Why does remaining wall thickness matter?

The wall between a coolant channel and the thermal contact face must stay thick enough for the design. If it is too thin, the tool can break through, the plate can deform, and pressure strength and flatness can suffer. Your drawing should state the minimum wall thickness in critical areas, not only the total plate thickness.

Can you control the thermal contact face flatness?

We machine and inspect the thermal contact area against the flatness and roughness on your drawing. We do not quote one blanket flatness number for every plate, because the result depends on material, size, wall thickness and the joining steps used. Where joining can cause distortion, final machining is agreed with you.

Can you machine O-ring grooves and cover plates?

Yes. We machine O-ring grooves, bolt patterns, sealing faces and cover plates to drawing. Groove width, depth and finish follow the seal specification, not a rule of thumb. We control the machined dimensions and sealing faces. We do not promise a finished assembly will not leak before the agreed sealing and test steps are complete.

Can you do leak, flow and thermal testing?

These are separate services and are not claimed as standard in-house tests. If a project needs pressure, leak, flow or thermal validation, we confirm the real equipment, method and acceptance criteria first, or agree a qualified partner. Machined-part dimensional inspection alone does not prove a cold plate's sealing or thermal performance.

Do you provide thermal design or CFD simulation?

We review the manufacturability of the channel design you supply, including tool access, wall thickness and finishing. We do not offer thermal design, CFD simulation or flow optimization as an in-house service. Where the thermal design is already set, we focus on machining it accurately and repeatably.

What should I send for a cold plate quote?

Send a 3D CAD model and a 2D drawing with dimensions, tolerances and datums. Add the material grade, channel layout, minimum wall thickness, port and sealing details, quantity and inspection needs. For thermal parts, also share heat load, coolant, flow rate and any pressure or leak test requirements. Mark the drawing revision.

Do you support prototypes and repeat production?

Yes. Prototype orders start from one piece. After a sample is approved, repeat batches follow the same drawing revision, first article and inspection plan. Material, process or revision changes go through a control step, so later orders stay aligned with the first approved part.

Have a cold plate component to manufacture?

Send your 3D CAD model, technical drawing and material choice. Include the channel layout, minimum wall thickness, sealing and inspection needs, and any heat, flow or test data. We review the machining route and confirm the real scope before we quote. STEP · STP · IGES · DWG · DXF · PDF. NDA on request.

Xiamen Goldcattle Plastic & Metal Products Co., Ltd. · Founded in 1998 · manufacturing to your drawings and samples.

Founded in 1998 100+ machines across six core processes 500+ clients 1,000+ completed projects Customers in 100+ countries

Recommended Reading