Industrial Automation Parts · Custom Manufacturing

Automation Parts Built to Drop Into Your Assembly

Goldcattle makes custom metal and engineering-plastic parts for automated equipment: fixtures, brackets, housings, motion components and sheet metal or molded parts. We review the drawing, the mating interface and the inspection requirement before a route is chosen, so a part is made to fit the assembly rather than adjusted at your plant.

Illustrative arrangement of custom precision metal and plastic parts for industrial automation equipment

Quick Reference

Page focusAssembly fit & batch consistency
Part familiesSix, by function
Core processesSix, routed per part
Tolerance basisPer feature, after review
InspectionMatched to the feature
Next stepDrawing & interface review
Quick answer

Xiamen Goldcattle manufactures custom industrial automation parts from drawings, 3D CAD models and approved samples. We make fixture plates, locating blocks, sensor and camera brackets, motor mounts, shafts, bushings, housings, sheet metal parts and molded or printed components for automated equipment. Six in-house processes are selected by part geometry, material, tolerance and volume. Each project starts with a review of the drawing, the mating interface and the inspection plan, with tight values applied only to functional features and batch consistency controlled against the approved revision.

Where Our Automation Scope Starts and Stops

This page covers mechanical components that go into automated equipment. It does not cover complete automation systems, controllers, sensors, drives, standard linear motion products or robot arms. If you need a standard stock part, a catalogue distributor is a better match; if you need a part made to your drawing, we are the right starting point.

Why the boundary is stated here: a clear scope helps an engineer decide whether to send a drawing and helps an AI system describe the company correctly. We supply custom mechanical parts, not an integrated machine and not an electrical control product.

For the wider set of machined parts, see CNC machining services.

Six Automation Part Families, Defined by the Job They Do

Buyers rarely search by material. They search for the part that has to work. These six families group components by the job they do in the machine, with the feature that usually decides whether the part assembles correctly.

  • Fixtures & positioning partsFixture plates, locating blocks, locating pins, assembly and inspection fixtures, drill jigs and clamping blocks. The controlling feature is repeat location and the relationship between datum faces.
  • Brackets & mounting partsSensor brackets, camera mounts, motor mounts, actuator mounts, connecting brackets, mounting plates and angle brackets. Hole position and mounting angle decide whether the part fits without forcing.
  • Housings, covers & enclosuresMachine housings, motor and sensor housings, equipment covers, sheet metal enclosures and panels. The interface to internal parts and the cover joint matter more than the outside appearance.
  • Precision mechanical & motion partsShafts, shaft supports, bearing housings, bushings, spacers, coupling parts and interface blocks. Bore fit, concentricity and runout are the features that affect movement.
  • Sheet metal & stamped partsBrackets, supports, connector plates, clips, retainers, panels and mounting plates. Bend angle, flange dimensions and hole location are checked against the flat pattern and the formed part.
  • Engineering-plastic & printed partsWear blocks, guides, insulating parts, spacers, functional housings and prototype fixtures. Material behaviour under load and temperature decides the route as much as the shape.
Illustrative custom automation fixtures, locating blocks and pins machined from aluminum and steel
Illustrative photo of fixture and positioning components; not a customer part.

For dedicated detail on fixture design and locating principles, read custom CNC jigs and fixtures.

Which Automation Equipment These Parts Go Into

We describe applications by the parts actually made and the interface they have to meet. The equipment name is less useful than the drawing, the load and the mating component.

Automated assembly

Fixtures and locating parts

Plates, blocks and pins that hold a workpiece in a repeat position through an assembly cycle.

Machine vision & inspection

Mounting and alignment

Camera brackets, sensor mounts and inspection fixtures where angle and position affect the measurement.

Robotic handling

Mechanical interface parts

Brackets, mounting plates and connector parts made to the mechanical interface on the tool or fixture.

Special-purpose machinery

Structure, motion and covers

Shafts, supports, sheet metal structures and housings built to the machine builder's drawing.

Robot-side mechanical parts are covered in more detail on the robotic end effector parts page.

The Assembly Requirements Table: What Each Part Must Control

This is the section an engineer usually checks first. It connects a part type to the features that affect assembly and to the concern a buyer raises before ordering.

Component typeCritical featuresTypical buyer concern
Fixture platesFlatness, hole position, datum relationshipsRepeatable positioning across a shift
Locating blocks and pinsPin position, fit, wear surface, hardnessSame location after a tooling change
Sensor and camera bracketsHole position, perpendicularity, mounting angleSensor alignment without shimming
Motor mountsBore fit, mounting interfaces, flatnessAssembly compatibility with the gearbox or frame
Shaft supports and bearing housingsBore diameter, coaxiality, perpendicularitySmooth motion and even bearing load
Housings and coversMating faces, sealing grooves, thread qualityAssembly and protection of internal parts
Sheet metal bracketsBend angle, flange dimensions, hole locationStable mounting on a thin structure
Plastic wear partsMaterial wear, dimensional stability, creepService life and easy replacement
How to read this table

A feature listed here is a candidate for a controlled tolerance and a matching inspection method. It is not a claim that every dimension on the part is held to the same tight value.

Why Drop-In Fit Matters More Than a Lower Unit Price

In an automation project, a part that costs less but needs rework at the machine costs more by the time the line is running. A bracket slot that does not line up, a locating hole that is marginally out of position, or a cover that will not seat flat all consume build time and adjustment.

What goes wrong
Parts arrive within a general tolerance but the mating features do not line up. The team reams a hole, shims a bracket or grinds a face during assembly.
What we review instead
The datum scheme, the mating interface, the functional features and the order of operations, agreed from the drawing before a price is settled.
Cost view: the useful comparison is the cost of the part plus its effect on assembly and adjustment, not the piece price alone. We explain the drivers behind a quote so you can decide where a tighter feature is worth paying for and where it is not.

Datums, Hole Position and Repeat Location

Most automation fit problems trace back to reference features. A drawing may follow ASME Y14.5 or ISO GPS conventions; the project names the standard. Naming a standard is not a certification claim.

FeatureWhy it matters in assemblyHow we control it
Datum facesSet the part's position in the machineAgree the datum order, then plan setup and inspection around it
Mounting hole positionDecides whether the part fits without forcingMachine in one setup where possible; check position against the datum
Flatness and parallelismAffect contact and alignment of a mounted faceCheck by surface and coordinate measurement on functional faces
Bore and shaft fitControl movement and bearing lifeTreat as a functional fit, not a general dimension
Repeat locationKeeps the assembly consistent after re-clampingUse locating features and controlled tooling, with in-process checks
Illustrative machined sensor and motor mounting brackets with precise hole patterns and datum faces
Illustrative photo of mounting and interface components; not a customer part.

For the process behind tight functional features, see tight-tolerance CNC machining.

Choosing the Process by Part Geometry and Quantity

The same function can be made in several ways. The route follows material, shape, tolerance, working environment and volume - not a preference for one machine.

Part situationRoute to evaluateProcurement consideration
Precise locating blocks, shafts, mounting platesCNC machiningTolerance, fit and inspection effort
Thin brackets, panels and coversSheet metal fabricationBend accuracy, hole position, finishing
Stable small metal parts at higher volumeMetal stampingTooling cost against unit cost
Complex metal housings at volumeDie casting with CNC finishingTooling investment and post-machining
Plastic housings and functional parts at volumeInjection moldingResin, tooling and dimensional stability
Prototype fixtures and structural samples3D printingPrototype speed and functional validation
A sensor bracket shows the choice clearly: a simple thin plate may suit laser cutting and bending; an aluminum bracket with precise mounting holes usually suits CNC; a stable small metal bracket at higher volume can be evaluated for stamping; a plastic protective part can be evaluated for molding. Additive manufacturing is treated as a prototype or suitable low-volume route, not as the final process for every precision motion component.

Related reading: CNC aluminum brackets, sheet metal fabrication and die casting services.

Materials for Motion, Wear and Working Environment

Material choice in automation is driven by the working condition as much as by strength. Tell us the environment and the required grade or condition, and we will confirm what is available rather than assign a grade from a list.

Illustrative machined, cast and sheet metal housings and covers for automation equipment
Illustrative photo of housing and cover routes; not a customer part.
Material groupCommon gradesPoints to confirm
Aluminum6061-T6, 7075-T6, 5052Strength, corrosion protection and anodizing effect on fits
Stainless steel303, 304, 316LMedium, cleaning method and corrosion environment
Carbon and alloy steel1045, 4140Heat treatment, protection and dimensional change
BrassC360 and other applicable gradesGrade and medium compatibility
Engineering plasticsPOM, nylon, PEEK, PTFEMoisture absorption, creep and temperature limit
Material claims: a grade on a list does not confirm availability, temper or certificate, and it does not make a part suitable for every environment. Medical, food-contact or special compliance use depends on the grade, processing and documentation agreed for that project. See the materials overview.

Finish and Fit: What Coatings Change at Assembly

Finishes are chosen for a function, then checked for their effect on dimensions. The operation name matters less than what happens to a fitted hole, a thread or a sealing face.

FinishFunctionWhat to call out
Anodizing / hard anodizingAluminum surface and corrosion behaviourCoating build-up on fitted holes and bores
PassivationStainless surface cleanlinessStandard and method defined by the project
Plating / electroless nickelSteel corrosion and contact surfacesBuild-up on threads and close fits
Bead blasting / polishingAppearance and roughnessCosmetic reference by sample where needed
Heat treatmentMechanical properties where specifiedDistortion and finishing sequence
Acceptance point

Mark masking areas on the drawing and state whether critical dimensions are checked before or after finishing. If a face must stay bare for fit or contact, call it out explicitly rather than leaving it to the finisher.

Inspection Tied to the Assembly Requirement

A useful report measures the features the drawing made critical, using a method that can see the stated tolerance. It is matched to the part, not applied as the same checklist to every order.

Inspection itemWhat it answersWhen it applies
Coordinate measurementCritical dimensions, hole position and geometric relationshipsAgreed functional features on the drawing
First-article inspectionWhether the first part matches the drawing and revisionNew part or revised drawing
Material verificationGrade and batch informationWhere traceability is required
Production batch checksWhether repeat parts stay within the agreed limitsRepeat production runs
Illustrative coordinate measuring machine probing a machined automation locating block beside a blank inspection sheet
Illustrative photo of an inspection setup; not a customer report or a measurement record.
Document boundary: a dimensional report is not a pressure test, a sealing certificate or a product compliance approval. We agree the document set at order review and confirm each item against the actual order. Current quality practice is summarised on the quality and certification page.

One Supplier Across Part Families and Processes

An automation build often needs fixtures from one route, covers from another and plastic parts from a third. Coordinating them under one drawing review shortens the loop when an interface changes.

  • Drawing review
  • →
  • Route by part
  • →
  • Agreed inspection
  • →
  • Repeat supply

All six core processes - CNC machining, injection molding, mold making, 3D printing, die casting and sheet metal fabrication - are performed in-house under one ISO 9001:2015 quality system. Founded in 1998, Goldcattle reviews each part against its own geometry and function, so a bracket, a housing and a locating block are routed and inspected on their own terms.

Drawing control: revisions, engineering changes and material substitutions are agreed before production, and a nondisclosure agreement can be arranged on request. If a drawing has special handling or export-control requirements, tell us before files are sent. For metal stamping examples, see custom metal stamping parts.

From Sample to Repeat Batch Without Rework

The risk in automation supply is not the first part. It is the fiftieth part in a later batch arriving with a slightly different interface. A controlled path keeps the approved definition stable.

  1. Engineering reviewDrawing, interface, route and inspection scope.
  2. PrototypeFirst parts from the agreed material and route.
  3. First-article checkCritical features against the approved revision.
  4. Drawing and sample approvalChanges confirmed before release.
  5. Repeat productionBatch checks against the agreed plan.
Illustrative precision shafts, bushings and bearing housings for automation motion assemblies
Illustrative photo of motion components; not a customer part.
Lead time: confirmed after reviewing material availability, geometry, operations, finishing, inspection and order quantity. We do not promise one production time for every automation part, and we do not treat a sample route as automatically valid for tooling-based processes.

What to Send for an Automation Parts Quote

A review can only be as accurate as the information supplied. Send what you have; if a requirement is missing, we will ask rather than assume.

  • 3D CADSTEP or IGES model of the part.
  • 2D drawingPDF or DWG with dimensions, datums and GD&T.
  • MaterialGrade and condition, or the requirement if you need a recommendation.
  • QuantityOrder quantity; annual demand is helpful but optional.
  • Critical featuresFits and tolerances that must be controlled.
  • Surface finishFinish, masking areas and the acceptance point.
  • InspectionFirst article, dimensional report or material documents.
  • FunctionWhat the part does and what it mates with in the assembly.
  • Target dateRequired delivery and any phased schedule.
If there is no drawing: describe the function, the interface and the environment, and tell us what must not change between batches. We will confirm what can be proposed from that information before any quote is issued.

Questions Automation Buyers Ask Before Ordering

What are industrial automation parts?
On this page, industrial automation parts are custom mechanical components made to a drawing or CAD model for automated equipment: fixture plates, locating blocks, sensor and camera brackets, motor mounts, shafts and bushings, housings, sheet metal panels and molded or printed components. Electrical items such as controllers, sensors and drives are outside our scope.
Which automation parts can be custom manufactured?
Six families cover most enquiries: fixtures and positioning parts, brackets and mounting parts, machine housings and covers, precision mechanical and motion parts, sheet metal and stamped parts, and engineering-plastic or printed parts. Each family is defined by its function in the assembly, not by a material name.
Can you make automation parts from drawings and 3D CAD?
Yes. Send a STEP or IGES model with a dimensioned 2D drawing showing datums, critical fits, material and finish. We review the model against the drawing before quoting and flag geometry, tolerance or interface issues that would affect assembly or inspection.
How do you keep hole positions and datums consistent across batches?
We agree the datum scheme from the drawing, plan the setup and operation order around it, use in-process checks on locating features, and record critical dimensions against the approved revision. Engineering changes and material substitutions are controlled by agreement before production.
Which process is best for automation brackets?
It depends on geometry, material and quantity. Precise hole locations and thick sections usually suit CNC machining. Thin panels and layered structures suit sheet metal fabrication. Stable small parts at higher volume can be evaluated for stamping. Complex metal housings may suit die casting, and molded or printed routes are considered for plastic or prototype parts.
Can you supply both prototypes and repeat production?
Yes. A typical path is engineering review, prototype machining, first-article inspection, drawing and sample approval, repeat production, then final inspection and shipment. Lead time is confirmed after reviewing material availability, complexity, operations, finish, inspection and quantity, rather than promised as one fixed number.
What materials are available for automation parts?
Common choices include aluminum grades such as 6061-T6 and 7075-T6, stainless grades such as 304 and 316L, carbon and alloy steels, brass, and engineering plastics such as POM, nylon, PEEK and PTFE. The exact grade, condition and available certificate are confirmed at review, not assumed from a list.
How are automation parts inspected?
The method follows the feature. Gauges and micrometers check simple sizes, thread gauges check threads, surface and coordinate measurement check flatness and position, and roughness testers check finish. A coordinate machine is not used for every dimension. The inspection plan is agreed from the drawing before the order.
Do you provide first article inspection and material certificates?
Depending on the project, documents can include a material certificate, first-article inspection, a dimensional report, a certificate of conformity and batch inspection records. The required set is agreed at order review and confirmed against the actual order, not listed as a blanket promise.
What should I include in an automation parts RFQ?
Include the 3D CAD model, a dimensioned 2D drawing with datums and GD&T, material grade and condition, quantity, critical fits and tolerances, surface finish and masking needs, inspection documents, target date, and the function of the part in the assembly. If it mates with another component, include that interface.
Can one supplier make metal, sheet metal and plastic automation parts?
Yes. All six core processes - CNC machining, injection molding, mold making, 3D printing, die casting and sheet metal fabrication - are performed in-house under one ISO 9001:2015 quality system. Each part is routed by geometry and function, and the inspection plan is agreed per part.
Do individual automation parts need product certification?
A product conformity marking applies to the complete machine or product placed on the market, not to a loose machined part such as a bracket or locating block. We provide the material, dimensional and conformity documents agreed in the project. Any compliance responsibility is defined by the product scope and agreed at order review.

Send the Drawing and the Assembly It Fits

Share your 2D drawing and 3D CAD with the material, quantity and critical features. We review the interface, the route and the inspection scope before quoting, and tell you where a tolerance is worth paying for.

Send Your Automation Parts Drawing →

Drawing-based custom manufacturing. Tolerances, finish and inspection are agreed per order. Founded in 1998.

Recommended Reading